Scaffold Towers

4 X 4 DIY STEEL SCAFFOLD	ID: DIY44
All standard towers are made out of 16g Mild Primer painted steel 4ft x 4ft Both kits give a working height of 19ft. Accessories available for both kits (Stabilisers, castors, etc) Also available galvanised at extra cost. Decks not supplied (AVAILABLE AT EXTRA COST)

Price: £112.80

6 X 4 DIY STEEL SCAFFOLD	ID: DIY64
All standard towers are made out of 16g Mild Primer painted steel 6ft x 4ft Both kits give a working height of 19ft. Accessories available for both kits (Stabilisers, castors, etc) Also available galvanised at extra cost. Decks not supplied (AVAILABLE AT EXTRA COST)

Price: £152.75

Minimax Base Pack	ID: Minimax Base
ARE YOU HOLDING THE FOLDING The first compact Alloy tower system to fit your pocket. MINIMAX the professional folding tower system that fits the smallest of vans and the most modest of pockets. MINIMAX grows to meet your needs. Available as Base, Guardrail, Stabiliser and Extension packs. BASE PACK WORKING HEIGHT 2.9Mtr. MINIMAX system approved to British standards HD1004.

Price: £338.40

Minimax Guardrail Pack	ID: Minimax Guard
This additional pack added to the Minimax base system converts your tower to give you a working height of 3.7Mtr Pack contains: 2 x Guard frames 1 x Diagonal Brace 5 x Horizontal Braces 4 x Interlock Clips

Price: £205.16

Minimax Extension Pack	ID: Minimax Base
This additional pack added to the Minimax base and Guardrail system converts your tower to give you a working height of 5.7Mtr Pack contains: 2 x 8 Rung frames 3 x Diagonal Brace 2 x Horizontal Braces 4 x Interlock Clips 1 x Trapdoor Platform 1 x Toe Board Kit NOTE: We recommend the purchase of 2 x Small Stabiliser Packs for Extra stability.

Price: £437.10

Minimax Small Stabiliser Pack	ID: Minimax Stabilisers
This additional stabiliser pack added to the Minimax system provides extra stability at 5.7Mtr working heights Pack contains: 2 x Stabilisers NOTE: We recommend the purchase of 2 x Small Stabiliser Packs for Extra stability.

Price: £133.95

TRADE ALUMINIUM TOWER

ID:

* Two widths available 1.45Mtr and 0.85Mtr
* Two lengths available 1.8Mtr & 2.5Mtr
* Available to Platform heights of 10.2Mtr
* Extruded Tube Diameter 50.8mm
* Extruded Tube thickness 1.6mm
* 3mm Frame Spigots
* Dual brake system on castors.
* Reinforced platforms.
* Smooth and ribbed braces for quick indentification.
* Extruded aluminium Ladder stile and rung.
* Wide ladder with Hexagonal rungs.
* Stainless steel bracing Lock pins
* Articulated rubber feet on stbilisers.
* Meets British Standards HD1004

TOWERMATIC

ID: TOWERMATIC

The Towermatic was developed with Hire Station, it was looking for something like the UpRight PedaLift, if possible with a simpler mechanism.

The resulting product is all aluminium and uses spring counterbalance in order to provide most of the lift for the scissor type structure. Set up is simple, while the unit has four outriggers, they are not required when indoors, although many will set them for the “feel good factor” and some additional rigidity. Then having set the lever with a certain technique that will take a few attempts to master, a single shove can take the platform to its maximum four metres height. the structure locks into place and the user then climbs the ladder built into the end of the scissor arms. Hoops half way up help provide additional security while climbing.

THE KEY FEATURES OF TOWERMATIC

* No Engine / Batteries, Or External Power Requirement
* Lightweight Alloy Construction
* Integral Access Ladder
* Climbing fall restraint hoops
* Integral additional stability outriggers
* Levelling capability
* Industry Standard Locking Castors
* Electrically Insulated
* Fall arrest lashing ring
* Locking fold away handrails
* Forklift Access rails
* Easily towed with it's trailer Patented designs
* Conforms to all relevant industry Standards

SPECIFICATION

Maximum Platform Height 4 metres
Maximum working Height 6 metres
Closed Height 1850mm
Dimensions L x W 1880 x 895
Total Weight 320Kg
Time to full height 10 Seconds
Work Platform Capacity SWL 250Kg
Work Platform Size L x W 1400 x 750
Castor Size 150mm
Aluminium Grade 6082 T6

SAFETY

CE Complies
Designed and manufactured with reference to, or application of Standards

BS EN 280:2001
BS 1139-3: 2001
BS EN 294:1992
BS EN 349: 1993
BS EN 547-1:1997
BS EN 547-2:1997
BS EN 547-3:1997
BS EN 811:1997
BS EN 953: 1998
BS EN 1050:1997

NB. All dimensions are nominal.

Price: £5875.00